To maintain the durability of extruded plastic profile in harsh environments, we must first start with the materials. Choose plastics with strong impact resistance and weather resistance, such as polycarbonate, which can withstand external force extrusion and remain stable under different temperatures and humidity. At the same time, for environments with fire protection requirements, it is important to add flame retardants.
The structural design of the lamp is also critical. Reasonable design of the wall thickness should not be too thin and easy to break, nor too thick to increase costs. Generally, the wall thickness of outdoor lamps is 3-5mm. Set reinforcement ribs or reinforcement structures at corners and joints that are prone to extrusion, such as setting triangular reinforcement ribs at the four corners to disperse external forces. If the lamp is installed at a high place or in a place prone to collision, use a buffer structure, such as installing a rubber buffer pad at the bottom to absorb the impact.
Surface treatment cannot be ignored. To resist chemical corrosion, apply an anti-corrosion coating, such as fluorocarbon paint or powder coating. To ensure a good waterproof seal, use high-quality sealing rubber rings and sealants to seal interfaces and joints to prevent moisture and dust from entering.
Correct installation of lamps is also important, and suitable accessories should be used to fix them firmly in harsh environments. In addition, lamps should be inspected and maintained regularly, dust and dirt on the surface should be cleaned, seals and structural integrity should be checked, and any problems found should be repaired in a timely manner.
